Dcm4chee outside Bahmni

Hi everyone, I am newbie to your community, and I am very interested by the bahmni solution. I have done many tests and it works well.

But, I already have dcm4chee servers in production, is there way to use bahmni with a dc4chee servers in a separate way?

How to configure for bahmni work with my dcm4chee already in production?

Thanks for your help.

1 Like

Hey @rud,

Welcome to the community.

I am yet to interact deeply with bahmni, however I believe @darius @dkayiwa and @ssmusoke may be better equipped to respond to your questions, or at least guide you to resources that will.

In the meantime, I suggest you look into the following resources, there might be something useful to you there;

Bahmni Developer’s Guide - https://bahmni.atlassian.net/wiki/spaces/BAH/pages/1310748/Developer+s+Guide

SetUp the DCM4CHEE Server - https://bahmni.atlassian.net/wiki/spaces/BAH/pages/24215562/SetUp+the+DCM4CHEE+Server

Advanced Installation Options - https://bahmni.atlassian.net/wiki/spaces/BAH/pages/53837879/Install+Bahmni

Thank you @lwanjiru for your reply.

Actually I looked at all the documentations you mentioned, I can not find anything other than the inventory file during installation - https://bahmni.atlassian.net/wiki/spaces/BAH/pages/35291242/Install+Bahmni+on+CentOS+Advanced+Installation+Options

I try custom the file "locale " at [pacs-integration] with the adress IP of my DCM4CHEE server but it does not work…

Also I forgot to mentioned that I use dcm4chee with the database mysql. This is a problem for Bahmni?


Hi @rud, pacs-integration acts as a bridge to convey orders from Bahmni to dcm4chee. The details of which dcm4chee server to connect to are specified in the modality table of bahmni_pacs postgres database installed along with pacs-integration service. Refer documentation on this page
https://bahmni.atlassian.net/wiki/spaces/BAH/pages/36700254/Setup+PACS+Integration+module Where you install pacs-integration doesn’t matter but please ensure that the entries in database are correct for both reading the orders and sending it to dcm4che. What database dcm4chee is using wouldn’t matter but the ORM service to which pacs integration sends order should be configured correct. Bahmni requires custom orm2dcm.xsl. Specifics are described here https://bahmni.atlassian.net/wiki/spaces/BAH/pages/36077574/Setup+DCM4CHEE+Server+with+Oviyam2

The digital x-rays after upload can be viewed by configuring pacs display control as mentioned in this page https://bahmni.atlassian.net/wiki/spaces/BAH/pages/114206820/PACS+Orders+Control Please make sure that you specify the correct ip address there.

1 Like

Thanks a lot @arjun, one more question. On my home page (https://localhos), the link Radiology for acces to my dcm4chee doesn’t work. Do you know where is he configured please ? It’s like pacs-conector is not connect to the dcm4chee server. Regards

1 Like

Hi @rud, We fixed this in the latest v0.90 Bahmni release. You can find the commit details here. You can directly add that piece of line in /etc/httpd/conf.d/ssl.conf file and restart the httpd service.



All is ok. Thanks a lot

1 Like